This guide offers a complete walkthrough for users to install, update, and manage the Buzzblender application on supported Samsung Tizen-based displays.
Before you begin ensure the following:
1. The screen is connected to power
2. The screen is connected to a stable network
3. You have the screen’s remote control If settings have already been changed, we suggest performing a factory system reset before installation (see FAQ section for instructions on this).`
Requirements
- USB flash drive
- Computer
- BuzzBlender installation files
Step 1 — Prepare the USB Drive
- Insert the USB flash drive into your computer.
- On the root of the USB drive, create a folder named:
SSSP- Copy both BuzzBlender installation files into the
SSSPfolder. You can download the files using this link: https://buzzblender.com/buzzblendersssp.zip
Your USB structure should look like this:
USB Drive
└── SSSP
├── BuzzBlender.wgt
└── sssp_config.xml
Step 2 — Connect the USB Drive
- Insert the USB flash drive into the Samsung Signage Display.
Step 3 — Install the Application
- Press the Home button on the remote control.
- Open:
- URL Launcher Settings (Tizen 4.0 Display)
or - App Management (Tizen 6.5)
(depending on your Samsung display model).
- URL Launcher Settings (Tizen 4.0 Display)
- Select Install from USB device.
- Create a PIN code if prompted.
- Wait for the installation to complete.
Once installed, the BuzzBlender app will launch automatically. Sign up at app.buzzblender.com and connect your screen via the access code. app.buzzblender.com/devices
if Samsung SSSP is already in use
Follow these steps before proceeding with the setup:
Tizen 4.0
- QMN series: QM43N, QM49N, QM55N, QM65N, QM75N, QM85N
- QBN series: QB43N, QB49N, QB55N, QB65N, QB75N, QB85N
- QEN series: QE49N, QE55N, QE65N, QE75N, QE82N
- OMN series: OM46N, OM55N
- OHN series: OH46N, OH55N
- OMN-D series: OM55N-D, OM46N-D
- Kiosk series: KM24A
- Uninstall any previously installed apps. In case there was a previous application installed, it will show near App Management
- Make sure the time is configured correctly. Go to Menu > System > Time.
- Verify that Secured Protocol is enabled. Go to Menu > System > Security.
- Press the HOME button on the remote control.
- Open URL Launcher Settings.
- Select Install from USB device.
- Create a PIN code if prompted.
- Wait for the installation to complete
- Once installed, the BuzzBlender app will launch automatically. Sign up at app.buzzblender.com and connect your screen via the access code. app.buzzblender.com/devices
Tizen 6.5
- QBB series: QB43B, QB50B, QB55B, QB65B, QB75B
- QMB series: QM43B, QM50B, QM55B, QM65B, QM75B
- QHB series: QH43B, QH50B, QH55B, QH65B, QH75B
- OMB series: OM46B, OM55B
- OHB series: OH46B, OH55B
- OMD series: OM55B-D, OM46B-D
- From the Remote Control, Press HOME
- From the menu, Choose Custom App
- In case there was a previous application installed, it will show near App Management
- Choose it and click Uninstall
- Open App management. Choose Install from USB Drive
- Create a PIN code if prompted.
- Wait for the installation to complete
- Once installed, the BuzzBlender app will launch automatically. Sign up at app.buzzblender.com and connect your screen via the access code. app.buzzblender.com/devices
Tizen 7
- QHC series: QH43C, QH50C, QH55C, QH65C, QH75C, QH85C
- QMC series: QM43C, QM50C, QM55C, QM65C, QM75C, QM85C, QM98C
- QBC series: QB43C, QB50C, QB55C, QB65C, QB75C, QB85C
- OMC series: OM46C, OM55C
- OHC series: OH46C, OH55C
- OMC-D series: OM55C-D, OM46C-D
Configure the display to run through Custom App mode by navigating to:
Menu → System → Play Via → Custom App
In case there was a previous application installed, it will show near App Management. Choose it and click Uninstall
To install Buzzblender application, open:
Features → App Management
If the App Management option is unavailable, switch the display source to HDMI and try accessing the menu again.
In App Management, select Install from USB Device to begin the installation.
Once installed, the BuzzBlender app will launch automatically. Sign up at app.buzzblender.com and connect your screen via the access code. app.buzzblender.com/devices
Signage display after factory reset or when brand new
Tizen 4.0
- QMN series: QM43N, QM49N, QM55N, QM65N, QM75N, QM85N
- QBN series: QB43N, QB49N, QB55N, QB65N, QB75N, QB85N
- QEN series: QE49N, QE55N, QE65N, QE75N, QE82N
- OMN series: OM46N, OM55N
- OHN series: OH46N, OH55N
- OMN-D series: OM55N-D, OM46N-D
- Kiosk series: KM24A
The brand new device will start with an initial setup, follow the below instructions:
- On the Installation Type screen, select Basic Setup.
- Choose your preferred language.
- Select the screen orientation: Landscape or Portrait.
- Set Auto Power Off to Off.
- Configure the network connection using either Wi-Fi or Wired LAN.
- When prompted on the Play Via screen, select MagicINFO.
- Click Done to continue.
- On the Connect to RM Server screen, select Skip.
- Adjust the date and time settings as needed.
- Open App Management from the settings menu or by pressing Home button.
- Select Install from USB device.
- Create a PIN code if prompted.
- Wait for the installation to complete.
- Once installed, the BuzzBlender app will launch automatically. Sign up at app.buzzblender.com and connect your screen via the access code. app.buzzblender.com/devices
Tizen 6.0
- QBB series: QB43B, QB50B, QB55B, QB65B, QB75B
- QMB series: QM43B, QM50B, QM55B, QM65B, QM75B
- QHB series: QH43B, QH50B, QH55B, QH65B, QH75B
- OMB series: OM46B, OM55B
- OHB series: OH46B, OH55B
- OMD series: OM55B-D, OM46B-D
- From the Welcome screen, select your preferred language.
- Connect the display to the network using either a wired or wireless connection.
- Read and accept the Privacy Notice to continue.
- In the Installation Type menu, select Basic Setup.
- Choose the desired screen orientation: Landscape or Portrait.
- In the Player Selection step, select MagicINFO Player.
- When prompted to configure the RM Server, select Skip.
- Turn Auto Power Off mode off.
- Configure the correct date and time settings.
- Create a security PIN for the device.
- Using the remote control, press the MENU button.
- Open App Management from the settings menu.
- Select Install from USB device.
- Create a PIN code if prompted.
- Wait for the installation to complete
- Once installed, the BuzzBlender app will launch automatically. Sign up at app.buzzblender.com and connect your screen via the access code. app.buzzblender.com/devices
Auto Start Application
Automatically launches your signage app when the display powers on or reboots.
Settings → System → Auto Start Application
Enable this option and select your installed application to start playback automatically after startup.
How to Switch a Samsung Display from MagicINFO to URL Launcher
If the URL Launcher or App Management options are missing from the Home Menu on your Samsung display, the device is likely set to MagicINFO mode.
To access these options, you’ll need to change the playback source to Custom app.
Follow these steps:
- Press the Menu button on the remote control to open the settings menu.
- Select System.
- Scroll down and choose Play Via.
- Change the setting to Custom app.
Note: You may see URL Launcher instead of Custom app. Select URL Launcher in that case.
Compatible with a wide range of Samsung Signage Models
The models listed below are examples of supported Samsung Signage Models and do not represent the full list of compatible devices.
SSSP10 Tizen 2022 and Newer
- QMC Series
- QHC Series
- QBB Series (Basic)
- QBB: QB43B, QB50B, QB55B, QB65B, QB75B.
- QMB Series (Mid-Range)
- QMB: QM43B, QM50B, QM55B, QM65B, QM75B.
- QHB Series (High-End)
- QHB: QH43B, QH50B, QH55B, QH65B, QH75B.
SSSP7 Tizen 2021
- QBR-B Series
- QB24R-B, QB85R-B.
- QMT-B Series
- QM98T-B.
- QMR-B Series
- QM32R-B, QM85R-B.
- QMB Series
- QM32B, QM43B, QM50B, QM55B, QM65B, QM75B.
- QHB Series
- QH43B, QH50B, QH55B, QH65B, QH75B.
- OH (Outdoor Signage)
- OH55A, OH75A, OH85A.
SSSP6 Tizen 2018 and Older
- QMR-AN
- QM32R-AN.
- QB Series (Basic)
- QBR: QB13R, QB24R, QB43R, QB49R, QB50R, QB55R, QB65R, QB75R, QB85R, QB98R.
- QBN: QB49N, QB55N, QB65N, QB75N, QE82N.
- QBT: QB98T-B.
- QM Series (Mid-Range)
- QMR: QM32R, QM43R, QM49R, QM50R, QM55R, QM65R, QM75R, QM85R.
- QMR-A: QM32R-A, QM43R-A, QM49R-A, QM50R-A, QM55R-A, QM65R-A, QM75R-A.
- QMN: QM43N, QM49N, QM55N, QM65N, QM75N, QM85N, QM98N.
- QMT: QM98T.
- QH Series (High-End)
- QHR: QH43R, QH50R, QH55R, QH65R, QH75R.
- Window Display (OM)
- OMN: OM46N, OM55N.
- OMN-D: OM46N-D, OM55N-D.
- OH (Outdoor Signage)
- OHF: OH55F.
- OHN: OH85N, OH85N-SK, OH85N-DK, OH85N-S.
Take control of your screens today with Buzzblender
Frequently Asked Questions
Which Samsung displays support BuzzBlender?
BuzzBlender supports Samsung Signage Displays running the SSSP platform.
Do I need a USB drive to install BuzzBlender?
Yes. A USB flash drive is required to install the BuzzBlender application on a Samsung SSSP display.
What folder name should I use on the USB drive?
Create a folder named SSSP in the root directory of the USB drive.
Where should I copy the installation files?
Copy both BuzzBlender installation files into the SSSP folder on the USB drive.
How do I install the app on the Samsung display?
Insert the USB drive into the display, open URL Launcher Settings or App Management, and select Install from USB device.
Why do I need to create a PIN?
Samsung displays may require a PIN code for security before installing third-party applications.
Will the app launch automatically after installation?
Yes. Once the installation is complete, the BuzzBlender app will launch automatically.
What should I do if the installation does not start?
Make sure the USB drive is properly formatted, the SSSP folder is located in the root directory, and both installation files are copied correctly.
Can I update BuzzBlender using USB?
Yes. Copy the latest installation files to the SSSP folder on the USB drive and repeat the installation process.
Does the installation require an internet connection?
No. The installation can be completed entirely from the USB drive.
Samsung Signage User Guides
What Our Customers Say
⭐⭐⭐⭐⭐
The Easiest and Most Affordable Digital Signage We’ve Used
We tested several digital signage solutions before switching, and BuzzBlender has been the simplest and most reliable by far.
Setup on our Samsung displays was fast, and managing content is incredibly easy—even for non-technical staff. We can update screens in real time, run promotions, and control everything remotely without extra hardware.
Compared to other systems, it stands out for both ease of use and pricing. Just five dollars.
Vasiliy, co-founder of Ecomind
Leave a Reply